To install SYSBUSY.

    1.  Unzip this file.  There are 2 files contained within the zip file.
        This document and the binary executable for the Tandem.

    2.  IXF or FTP the SYSBUSY file to the Tandem.  You should specify
        a binary transfer.  Put the file in $system.system or wherever
        it is convienient.

    3.  On the Tandem, you will have to do a "FUP ALTER SYSBUSY, CODE 100"
        before you can run SYSBUSY.

    4.  Type SYSBUSY at the Tacl prompt.  Optionally a system name may be
        included on the run line to monitor another system.  i.e.  sysbusy \test
        No remote password or special privledges are required.

    5.  When done, press F16 to exit SYSBUSY.

SYSBUSY has been tuned to use minimal system resources.  Performance monitoring
utilites which use a lot of resources are not very useful.

SYSBUSY is not licensed and uses only standard procedure calls.  It does not
required measure to be running.

Feel free to pass this out to friends!  You can get a new copy from our
web site www.kldinc.com anytime.  We have no plans to ever charge for our
utilities.

Forward any comments, problems, suggestions, or ideas for new utilities to
support@kldinc.com.

Version 1.1 - Removed expiration date
Version 1.2 - Corrected looping if terminal session terminated
Version 1.3 - ITUG 2000 Special Edition
Version 2.0 - Supports Large Systems, improved performance
Version 2.5 - Supports D38, Itanium version, Multi-system support

Thanks for using SYSBUSY!